If Your Hot Water System Suddenly Stops Working: What to Do
If Your Hot Water System Suddenly Stops Working: What to Do
Blog Article
What are your thoughts and feelings on How to Troubleshoot and Repair an Electric Water Heater?
Lots of contemporary houses use an electrical hot water heater for their heater, because of its benefit and ease of use. Nonetheless, similar to any other electric devices, issues may arise with its use, suddenly. It can be really aggravating to wake up to a cool shower rather than a hot one or having your bath with water that isn't hot enough or perhaps as well hot. Whatever the instance might be, water heater problems can be rather nerve-racking. The good news is, we have actually made a list of feasible options to your water heater issues. There are a variety of elements that could cause many of these troubles, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for security. Whatever the problem is, getting it dealt with ought to not posture excessive of an issue if you comply with these actions:
Call An Expert:
If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for an expert opinion. The trouble with your heater could be that the cold and hot taps have been switched over or it may be undersized for the quantity of warm water needed in your house. Whatever the situation might be, a professional plumber would aid solve the issue.
Examine Your Power Supply:
As basic as this might appear, it is very necessary. Without appropriate power, your hot water heater will not operate. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the issue, just turn it on and off again. Change any type of broken or worn-out fuse. Check the device with power after these modifications to see if it's now working.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may require to examine the temperature settings on your upper thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open the gain access to panel as well as press the red switch for temperature reset above the thermostat. This must aid heat the water. Turn the circuit breaker back on and inspect if the issue has actually been settled.
Check the Heating Element in the Water Heater:
If it's not a power issue, after that attempt looking into your burner if it is still functioning. Examine each of your burner to be sure the problem isn't with any one of them. If any of them is damaged, replace that component and afterwards examine whether the warm water is back on.
Verdict
Hot water heater issues are not always major. A number of them are because of small issues like a blown fuse or damaged heating element. Replacing the defective parts need to do the trick. However, if you are still not able to fix the trouble, give a call to your local plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a devoted reader about Hot Water Heater Repair, I thought sharing that piece of content was essential. Do you know about somebody who is intrigued by What Would Cause My Electric Water Heater to Stop Working?? Why not share it. Thank you so much for taking the time to read it.
Plumber on standby. Call! Report this page